When your AC drain line keeps clogging, it can be frustrating if you don’t know why it’s happening or how to resolve it. Even worse, a clog in the line can lead to even bigger AC problems that require expensive repairs. Fortunately, a clogged condensate drain pipe is a common issue that usually isn’t too complicated to fix. It’s even easier to take some common-sense steps to prevent the line from clogging in the first place.

Here are some signs that your AC drain line is clogged:

• There is standing water in the drain pan of the AC’s indoor unit.
• There are damp conditions or water damage near the indoor unit.
• A moldy, mildew-y or musty smell is coming from the indoor unit or from the AC vents in the house.
• The AC isn’t working—either it won’t turn on, it shuts off unexpectedly, or it runs but isn’t cooling the home.

One common reason why AC … Read Full Post »

The summer sun is beating down or winter’s chill arrives, so you set your thermostat to a comfortable temperature. But, your system doesn’t respond. What do you do next?

You could put on a pair of shorts or a parka, depending on the weather, but that doesn’t solve the problem. The best bet would be to contact a professional who knows exactly what to look for. They know how to get things working properly again. Or, you could take a couple of steps yourself first.

You Set the Thermostat Too High or Too Low

Have you set the thermostat a lot higher or lower than the outside temperature? Forcing the HVAC to “hurry up” and heat or cool your home to your desired temperature only makes the unit work harder. This won’t get you to your comfort zone and it isn’t good for the life of the system either.

There’s Debris Inside the Thermostat

The … Read Full Post »

The low “whoosh” of a furnace kicking on brings a sigh of relief when the temperatures drop. But, it’s a shock when your furnace turns on but there’s no heat. If your furnace is not putting out the heat you need, there are a couple of things you can check.

Check the Switches

First, take a look at your thermostat. It might seem obvious, but sometimes, a homeowner has accidentally clicked “cool” rather than “heat.” Luckily, if that is the case, it is an easy fix to click the switch to the correct function.

Your thermostat has another toggle that can just as easily be the reason for the flow of cool air in the cold weather. The location might vary, but somewhere on the wall thermostat is a switch that says “Auto” and “On.” A switch on “Auto” will make the furnace click on only when a sensor signals that the temperature … Read Full Post »